Tool length: 4.5 in. / 11.43 cm.
Cuts leads to .060" (1.52 mm) and bends them
at angle, leaving lead ends square.
To order other than .060" and 20° indicate
lead length and angle. Example: For .050"
length and 30° angle, order P/N 202A-050 30°.
Tool length: 4.5 in. / 11.43 cm.
Similar to 202A featuring an oblique angle that
offers better lead visibility.
To order other than .060" and 20°, indicate
lead length and angle. Example: For .055"
length and 35° angle, order P/N 212A-055 35°.
Tool length: 4.5 in. / 11.43 cm.
Bends leads at 45° then cuts, leaving a .060"
(1.52 mm) standoff. Other angles and lengths are
available.
To order other than 45° and .060", indicate
degree of bend required and lead length. Example:
For 40° angle and .050" length, order
P/N 204A-050 40°.
